Weighing and Feeding Conveyors
The dosage of the rubbers used to obtain the mixture is made by weighing and feeding conveyors. The operator panel standing in front of the weighing belt shows what kind of rubber material to weigh, according to this information, the operator weighs the desired type amount of rubber. If the weight is within the tolerance limit, other compound raw materials in the recipe are weighed. If the weighing is not within the tolerance limit, the tolerance message is displayed and the system will direct the operator to correct weighing. Again, after weighing the rubber in the same weighing, weighed micro chemicals in eva bags are checked according to the prescription. This control can be done by weight and barcode reading. All the raw materials prepared for the batch are weighed and then passed to the next conveyor, the feeding conveyor. The materials waitingfor its order in the feed conveyor are sent to the mixer as soon as demand is received from the mixer.